Cutting Fluid

The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. It is compatible with hex shank systems.

The Pointed Chisel has a pointed tip for precise adjustment work in concrete. It is intended for use in concrete and brick for mortising, demolition and adjustment work, including restoring joints and clearing reinforcements.

The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements.

The Pointed Chisel delivers a constantly high material removal rate due to its self-sharpening feature. The special star shape at the working end retains the shape of the accessory to prevent work interruptions. The chisel is intended for use in concrete and brick for mortising and demolition work, including restoring joints and clearing reinforcements. It is compatible with a 30 mm hex shank system for hammers.

The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements.

The Standard for Wood Laminate Trim Bit delivers a high cutting performance for flush trimming. Durability and reliable cutting results are achieved by its high-quality tungsten carbide cutters. Furthermore, the bit prevents kickbacks by limiting the thickness of the generated chips. This bit is intended for flush trimming of protruding materials such as laminate and veneer as well as solid wood and wood composites. It is suitable for use with handheld-routers and table-mounted portable routers.

The Carbide Reversible Planer Knife delivers clean planing results on all wooden materials. Its sharp blades are double-edge ground, enabling the reversible use of either side. It is intended for a wide variety of planing applications such as fitting, sizing and chamfering as well as rebating in hardwood, softwood and wood composite materials.

The Wood Razor Carbide Reversible Planer Knife offers smooth, clean, perfect planing results in solid wood surfaces. Its sharp blades are double-edge ground, enabling the reversible use of either side. Made of Micrograin Carbide, the knife features an extremely sharp cutting edge that achieves consistently fine and even finishes. Micrograin Carbide is furthermore highly wear resistant. It provides resistance to damage and fractures from accidental nail or staple strikes, enabling a long lifetime of usage. This durable knife is intended for a wide variety of planing applications such as fitting, sizing and chamfering as well as rebating in hardwood, softwood and wood composite materials.

The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a brilliant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is compatible with angle grinders.

The X431 Standard for Metal provides a good finish when grinding edges and welded seams as well as coarse-sanded metal surfaces. Its semi-friable aluminium oxide grit is robust and wear-resistant, producing a consistent finish. The sturdy backing material is x-cloth: providing stability when grinding for clean and even results. The X431 Standard for Metal is compatible with angle grinders. The grit is bonded using fully synthetic resin for wear resistance in heavy-duty applications. The carrier plate is available in both angled and straight, fibreglass and plastic versions.

The C430 Expert for Wood and Paint provides an exceptionally long lifetime when sanding wood, veneer and solid surfaces. Furthermore, its electrostatic open-coated surface with space between the grits ensures consistent dust removal, preventing sheet clogging. The tough abrasive grit is resistant to wear, allowing for extended and repeated use. This product is intended for the keying and sanding of paint, varnish, filler, primer and wood-based materials, and is suitable for intermediate sanding of varnish on surfaces. It is also suitable for sanding after wetting on certain materials as well as smoothing out feather edges. The C430 Expert for Wood and Paint sanding sheet is compatible with delta sanders and multi-cutters.

The conical SDS max Toolholder is suitable for tamping plates or bush hammer heads. It is suitable for renovation and restoration jobs and breakthroughs as well as for mortising and demolition work. It is compatible with SDS max shank systems.

The Pointed Chisel delivers a constantly high material removal rate due to its self-sharpening feature. The special star shape at the working end retains the shape of the accessory to prevent work interruptions. The chisel is intended for use in concrete and brick for mortising and demolition work, including restoring joints and clearing reinforcements. It is compatible with a 28 mm hex shank system for hammers.

• Biodegradable
• Safe on all metals
• High performance lubricating ability eliminates galling and seizing
• Great for steel and aluminum
• Does not contain sulfur, chlorine, water, mineral oil, or inactive fillers
• Does not irritate the skin, eyes or respiratory tract

The hook-and-loop-type Fastening Plate for Sanding Sheets is a base plate that uses a hook-and-loop system to attach sanding sheets when using angle grinders. It is intended for use with angle grinders.